DFI - ddr-phy.org

Read commands ultilizing dfi_rddata_cs_n

Hi,

In DFI 3.1:

Is the figure 29 Read Commands Utilizing dfi_rddata_cs_n correct?

1. Why is the trddata_en timing is different in RDA and RDB (trddata_en = 1), and RDC (trddata_en=3)?

2. For RDA and RDB, when dfi_rddata_en is asserted for just 3 cycles, but it can clock out 4 valid data on dfi_rddata. Does it mean that when dfi_rddata_cs_n is asserted, dfi_rddata_en does not require to assert the any appropriate cycles? 

Besides, with this spec

"The maximum delay that can be achieved from the assertion of a new chip on dfi_rddata_cs_n and the corresponding dfi_rddata_en is limited to the maximum time the PHY has to make internal adjustments associated with changing the target chip select relative to the read data transfer (trddata_en - tphy_rdcslat),."

In the case of figure 29, trddata_en-tphy_rdcslat will be a negative value?!

Can any one clarify them?

Thanks in advance

Sunmon

Views: 43

Attachments:

Reply to This

Replies to This Discussion

Can anyone spend a little time to help me with this? I am in urgent

Thank you very much.

Sunmon

Reply to Discussion

RSS

© 2017   Created by Denali Software, Inc..   Powered by

Badges  |  Report an Issue  |  Terms of Service